收藏本站
AD9985A
Pin
Data Outputs
RED
GREEN
BLUE
Description
Data Output, Red Channel.
Data Output, Green Channel.
Data Output, Blue Channel. The main data outputs. Bit 7 is the MSB. The delay from pixel sampling time to output
is fixed. When the sampling time is changed by adjusting the phase register, the output timing is shifted as well.
The DATACK and HSOUT outputs are also moved, so the timing relationship among the signals is maintained. For
exact timing information, refer to Figure 9, Figure 10, and Figure 11.
Data Clock Output
DATACK
Data Output Clock. This is the main clock output signal used to strobe the output data and HSOUT into external
logic. It is produced by the internal clock generator and is synchronous with the internal pixel sampling clock.
When the sampling time is changed by adjusting the phase register, the output timing is shifted as well. The Data,
DATACK, and HSOUT outputs are all moved, so the timing relationship among the signals is maintained.
References
REF BYPASS
MIDSCV
FILT
Internal Reference Bypass. Bypass for the internal 1.25 V band gap reference. It should be connected to ground
through a 0.1 μF capacitor. The absolute accuracy of this reference is ±4%, and the temperature coefficient is ±50
ppm, which is adequate for most AD9985A applications. If higher accuracy is required, an external reference can
be used instead.
Midscale Voltage Reference Bypass. Bypass for the internal midscale voltage reference. It should be connected to
ground through a 0.1 μF capacitor. The exact voltage varies with the gain setting of the blue channel.
External Filter Connection. For proper operation, the pixel clock generator PLL requires an external filter. Connect
the filter shown in Figure 6 to this pin. For optimal performance, minimize noise and parasitics on this node.
Power Supply
V D
V DD
PV D
GND
Main Power Supply. These pins supply power to the main elements of the circuit. They should be filtered and kept
as quiet as possible.
Digital Output Power Supply. A large number of output pins (up to 25) switching at high speed (up to 110 MHz)
generates a lot of power supply transients (noise). These supply pins are identified separately from the V D pins so
special care can be taken to minimize output noise transferred into the sensitive analog circuitry. If the AD9985A
is interfacing with lower voltage logic, V DD can be connected to a lower supply voltage (as low as 2.5 V) for
compatibility.
Clock Generator Power Supply. The most sensitive portion of the AD9985A is the clock generation circuitry. These
pins provide power to the clock PLL and help the user design for optimal performance. The designer should
provide quiet, noise-free power to these pins.
Ground. The ground return for all circuitry on-chip. It is recommended that the AD9985A be assembled on a
single solid ground plane, with careful attention given to ground current paths.
Serial Port (2-Wire)
SDA
SCL
A0
Serial Port Data I/O.
Serial Port Data Clock.
Serial Port Address Input 1. For a full description of the 2-wire serial register and how it works, refer to the 2-Wire
Serial Control Port section.
Rev. 0 | Page 10 of 32
发布紧急采购，3分钟左右您将得到回复。

采购需求

(若只采购一条型号，填写一行即可)

发布成功！您可以继续发布采购。也可以进入我的后台，查看报价

发布成功！您可以继续发布采购。也可以进入我的后台，查看报价

*型号 *数量 厂商 批号 封装
添加更多采购

我的联系方式

*
*
*
相关PDF资料
ADA4850-2YCP-EBZ BOARD EVAL FOR ADA4850-2YCP
ADA4899-1YCP-EBZ BOARD EVAL FOR ADA4899-1YCP
ADA4937-1YCP-EBZ BOARD EVAL FOR ADA4937-1YCP
ADA4938-2YCP-EBZ BOARD EVAL FOR ADA4938-2YCP
ADF37A-KG-TAXB3-R CONN D-SUB FEMALE 37POS R/A .318
ADG465BRM-REEL7 IC 1CH PROTECTOR 8MSOP
ADG467BR IC CHAN PROTECTOR OCTAL 18-SOIC
ADISUSBZ KIT EVAL ADIS W/SOFTWARE USB
相关代理商/技术参数
AD9985AABSTZ-110 制造商:Analog Devices 功能描述:ANALOG INTERFACE FOR FLAT PANEL DISPLAYS - Bulk
AD9985AAKSTZ-110 制造商:Analog Devices 功能描述:ANALOG INTERFACE FOR FLAT PANEL DISPLAYS - Bulk
AD9985AAKSTZ-140 制造商:Analog Devices 功能描述:ANALOG INTERFACE FOR FLAT PANEL DISPLAYS - Bulk
AD9985ABSTZ-110 功能描述:IC INTERFACE 8BIT 110MSPS 80LQFP RoHS:是 类别:集成电路 (IC) >> 接口 - 专用 系列:- 特色产品:NXP - I2C Interface 标准包装:1 系列:- 应用:2 通道 I²C 多路复用器 接口:I²C，SM 总线 电源电压:2.3 V ~ 5.5 V 封装/外壳:16-TSSOP（0.173"，4.40mm 宽） 供应商设备封装:16-TSSOP 包装:剪切带 (CT) 安装类型:表面贴装 产品目录页面:825 (CN2011-ZH PDF) 其它名称:568-1854-1
AD9985AKSTZ-110 功能描述:IC INTERFACE 8BIT 110MSPS 80LQFP RoHS:是 类别:集成电路 (IC) >> 接口 - 专用 系列:- 特色产品:NXP - I2C Interface 标准包装:1 系列:- 应用:2 通道 I²C 多路复用器 接口:I²C，SM 总线 电源电压:2.3 V ~ 5.5 V 封装/外壳:16-TSSOP（0.173"，4.40mm 宽） 供应商设备封装:16-TSSOP 包装:剪切带 (CT) 安装类型:表面贴装 产品目录页面:825 (CN2011-ZH PDF) 其它名称:568-1854-1
AD9985AKSTZ-140 功能描述:IC INTERFACE 8BIT 140MSPS 80LQFP RoHS:是 类别:集成电路 (IC) >> 接口 - 专用 系列:- 特色产品:NXP - I2C Interface 标准包装:1 系列:- 应用:2 通道 I²C 多路复用器 接口:I²C，SM 总线 电源电压:2.3 V ~ 5.5 V 封装/外壳:16-TSSOP（0.173"，4.40mm 宽） 供应商设备封装:16-TSSOP 包装:剪切带 (CT) 安装类型:表面贴装 产品目录页面:825 (CN2011-ZH PDF) 其它名称:568-1854-1
AD9985BST-110 制造商:Analog Devices 功能描述:110 MSPS/140 MSPS ANLG INTRFC FOR FLAT PNL DISPLAYS 80LQFP - Bulk
AD9985BSTZ-110 功能描述:IC INTERFACE 8BIT 110MSPS 80LQFP RoHS:是 类别:集成电路 (IC) >> 接口 - 专用 系列:- 特色产品:NXP - I2C Interface 标准包装:1 系列:- 应用:2 通道 I²C 多路复用器 接口:I²C，SM 总线 电源电压:2.3 V ~ 5.5 V 封装/外壳:16-TSSOP（0.173"，4.40mm 宽） 供应商设备封装:16-TSSOP 包装:剪切带 (CT) 安装类型:表面贴装 产品目录页面:825 (CN2011-ZH PDF) 其它名称:568-1854-1